Self-fluxing Ni-based
20-106µ (standard sieve)
15-53µ (Surfit™ 1620 for minor repairs)
210-810 HV30
Finer powders increase deposition efficiency and improve the smoothness of the finished surface. However finer powders also limit the thickness of the layer that can be applied.
Therefore a balence between the thickness of the deposited layer and the smoothness of the finished surface is required.
Quick Guide
Surfit™ |
Typical Hardness HV30 |
Typical Hardness HRC |
Fluidity 1=high, 5=low |
Article Nr. |
| 1015 | 210 | 15 | 5 | 116006 |
| 1020 | 230 | 20 | 5 | 115943 |
| 1021-10 | 250 | 21 | 3 | 115958 |
| 1025-40 | 295 | 28 | 2 | 115997 |
| 1031-10 | 290 | 28 | 3 | 115944 |
| 1035-40 | 360 | 35 | 3 | 115945 |
| 1036-40 | 375 | 36 | 2 | 116003 |
| 1040 | 425 | 40 | 2 | 115946 |
| 1045 | 500 | 47 | 2 | 115999 |
| 1050 | 580 | 52 | 1,5 | 115947 |
| 1060 | 810 | 62 | 1 | 115948 |
| 1135-40 | 355 | 35 | 3 | 116001 |
| 1620 | 230 | 20 | 2 | 115957 |
| 1623-05 | 270 | 23 | 2 | 116004 |
