Self-fluxing Ni -based
36-106µ (Surfit™ 1240, 1250, 1260 for Castolin and Colmonoy spray guns)
45-125µ (Surfit™ 1340, 1350 for Metco and Uni spray guns)
185-820 HV30
Finer powders increase deposition efficiency and improve the smoothness of the finished surface. However finer powders also limit the thickness of the layer that can be applied.
Therefore a balence between the thickness of the deposited layer and the smoothness of the finished surface is required.
Quick Guide
Surfit™ |
Typical Hardness HV30 |
Typical Hardness HRC |
Alloy Base |
Article Nr. |
| 1240 | 380 | 38 | Ni | 115949 |
| 1245 | 450 | 44 | Ni | 116005 |
| 1250 | 570 | 51 | Ni | 115950 |
| 1260 | 720 | 61 | Ni | 115951 |
| 1340 | 370 | 38 | Ni | 115952 |
| 1345 | 450 | 44 | Ni | 115998 |
| 1350 | 530 | 51 | Ni | 115953 |
| 1355-20 | 700 | 57 | Ni | 116000 |
| 1360 | 790 | 61 | Ni | 115954 |
| 1360-20 | 820 | 62 | Ni | 116002 |
